OIL MIST ESP FOR TEXTILE INDUSTRIES

OIL MIST ESP

FOB* Price:	US $  / Set | get the latest price
Min.Order Quantity:	1 Set
Supply Ability:	100 Set/Sets per Month
Payment Terms:	L/C,T/T,Western Union

Electrostatic Air Filter (ESP) uses advanced electrostatic precipitator technology to purify smoke for textile fabric finishing (stenters), PVC leather/ gloves/ wallpaper/vinyl flooring production lines. Its oil mist purification efficiency is over 95%-99%, so no smoke can be seen at the outlet. 

For textile fabric processing industry, heat recovery can be done and some valuable oil can be collected to sell. For PVC production lines, much DOP oil will be collected and can be reused directly, which will take back the Electrostatic Air Filter (ESP) investment cost within one year. 

POLLUTANTS EMISSION DETAILS AFTER ESP INSTALLATION

Accoring to your customer’s demand, we made one (English version) for you to explain stenter exhaust air emission before and after installing our Industrial ESP based on one textile plant’s test report.

Emission concentration tested by turning on and turning off our Industrial ESP. The Particulate Emission Concentration is from 79.9mg/m3 to 7.62, 82.6 mg/m3 to 8.03mg/m3; Oil Mist Emission is from 86.5mg/m3 to 3.70mg/m3, 89.0mg/m3 to 4.26mg/m3. Therefore, we can see by using our ESP, the particulate removal efficiency is about 90% and oil mist removal efficiency is about 95%. 

Stenter Exhaust Air Composition is Organic Oil Vapors, Dyestuff Particulates, Finishing Auxiliary Mist, Lint and Dust.

Our Industrial ESP is also used to deal with smoke for PVC synthetic leather/vinyl gloves/PVC wallpaper/vinyl tile/PVC flooring mat/PVC flex banner/PVC conveyor belt/PVC air sock production etc. I also heard in Indiathere are many PVC synthetic leather and PVC wallpaper production plants. Can you contact such PVC products plants? If so, it will be easier to sell our Industrial ESP to them than textile fabrics processing plants because our ESP can collect about 200 KG DOP oil each day for PVC synthetic leather etc plants. The collected pure oil can be directly used in their production line, which will save them much cost each year, so they are very likely to install our industrial ESP.

For Industrial ESP, The particulate removal efficiency is over 90% and oil mist removal efficiency is about 95.5%. Each time our Industrial ESP installed in textile fabrics processing plants and PVC production plants, industrial ESP will be tested by local government and got approval.

Services:

    Power Buildesign

				Power Buildesign • Mechanical and Electrical Retrofitting work of ESP for improvement of Emission Level. • Visual inspection of ESP to identify problems and providing re...
				View on powerbuildesign.com	Preview by Yahoo

*terms and conditions for the latest price and other points..

NOW ENQUIRY :mail

BOILER/EPC POWER SYSTEM PROJECTS

ENMAS GB POWER SYSTEMS PROJECTS

  

FOB* Price:	US $  / Set | get the latest price
Min.Order Quantity:	1 Set/Sets
Payment Terms:	L/C,T/T

                         

Enmas GB Power Systems Projects Ltd combines the core strengths of GB and Enmas and offers the state of the art technology for power boilers for firing all types of disparate fuels such as coal, oil, gas, waste gas, biomass & biogas.

The key technical personnel of Enmas GB bring with them years of experience in design, detailed engineering and project management of Industrial & Utility Boilers from various renowned boiler companies in India and abroad.

Enmas GB is presently involved in the execution of fossil, biomass, waste fuel fired / waste heat recovery boilers for various Power & Cogeneration industries. Having laid a strong foundation in design, manufacture & supply of various kinds of boilers for almost three decades, Enmas GB entered into the field of EPC of power plants in 2007 & has had reasonable success.

We Operate under the following Business Areas listed below 

Business Areas

-          Power plant projects on EPC Basis (BTG and BOP islands).

-          Power Boilers.

-          Electrical and C&I balance of Plant.

-          EPC of Switchyards.

-          Power Evacuation, Transmission & Distribution

-          Manufacturing.

-          Erection and Commissioning Services.

We are  engaged in dealing of various engineering items and serving since last three decades in domestic market, our team worked with reputed companies Lodge Cottrell,Himenviro,Alsthom and Macawber for installation in Cement,Power,Steel and Alumina Sector . We offer you following equipment,services  and various products mentioned below.

1.Air pollution control equipment:

      http://powerbuildesign. com/products.php?id=9&flgg=cat

    Boilers

    Electrostatic Precipitators

    Bag Filters/Houses

    Ash handling Equipments

    Centrifugal and Axial Fans

    Industrial Oil Mist ESP

Deal in : ENMAS-GB(Boiler,ESP,EPC), Thermodyne(Boiler),Rieco(ESP, Size Reduction Equipment,Pneumatic Conveying),Fantek(Centrifugal & Axial Fans), KLEAN ,

Belt Conveyors,Bucket Elevators, 

Spares(All make as per requirement)

2. Services:

    Power Buildesign

				Power Buildesign • Mechanical and Electrical Retrofitting work of ESP for improvement of Emission Level. • Visual inspection of ESP to identify problems and providing re...
				View on powerbuildesign.com	Preview by Yahoo

*terms and conditions for the latest price and other points..

NOW ENQUIRY: mail

AIR POLLUTION CONTROL EQUIPMENTS

RIECO

ELECTROSTATIC PRECITATORS

FOB* Price:	US $  / Set | get the latest price
Min.Order Quantity:	1 Set/Sets
Payment Terms:	L/C,T/T,

The design of Electrostatic Precipitators is typically based on customer specifications: they include expected performances under different operating conditions of the industrial process. The design analysis starts from these operating conditions, to choose one or two worst cases: then the main geometrical and electrical characteristics of the ESP are defined by use of simplified collection efficiency calculations, basically derived by the manufacturer empirical measurements and experience.

This paper will illustrate the example of a real industrial Electrostatic Precipitator designed by Area Impianti and IRS for a Glass Factory.

The worst case main operating conditions are reported in

table 1: the customer specifications require a particle density at the ESP outlet lower then 30 mg/Nm3(dryat 8% of O2). The particle size distribution is characterised by a double distribution:

fine particles from the furnace, and course particles from the process reactions with

the additives. The ESP draft characteristics are reported in the second part of table 1.

FLUE GAS OPERATING CONDITIONS

Gas flow (on wet)	Nm3/h	124000.
Operating temperature	C	402.
Operating Pressure	KPa	98.7
O2Concentration	%vol	11.25
Relative humidity	%vol	8.7

INLET PARTICLE CHARACTERISTICS

Particle concentration (dry at 8% O2)	mg/Nm3	4707
Furnace particles (average diameter 0.25micron)	% in weight	4.2
Reaction particles (average diameter 6.0 micron)	% in weight	95.8

DRAFT ESP CHARACTERISTICS

N° of fields	Nos.	3
N° of gas passages ( d = 400 mm)	Nos.	19
N° of plates per field ( h = 13.35 m, l = 0.5 m)	Nos.	8
N° of emitting electrodes per plate (RDE type)	No.	1

BAG FILTERS/BAG HOUSES



The Bag house used for the fume extraction in Steel Plant have very specific design considering all parameters used in processing of the steel. 
Most baghouses use long, cylindrical bags (or tubes) made of woven or felted fabric as a filter medium. (For applications where there is relatively low dust loading and gas temperatures are 250°F or less, pleated, nonwoven cartridges are sometimes used as filtering media instead of bags.).Dust-laden gas or air enters the baghouse through hoppers (large funnel-shaped containers used for storing and dispensing particulate) and is directed into the baghouse compartment. The gas is drawn through the bags, either on the inside or the outside depending on cleaning method, and a layer of dust accumulates on the filter media surface until air can no longer move through it. When sufficient pressure drop (delta P) occurs, the cleaning process begins. Cleaning can take place while the baghouse is online (filtering) or is offline (in isolation). When the compartment is clean, normal filtering resumes.
Baghouses are very efficient particulate collectors because of the dust cake formed on the surface of the bags. The fabric provides a surface on which dust collects through the following four mechanisms:

• Inertial collection - Dust particles strike the fibers placed perpendicular to the gas-flow direction instead of changing direction with the gas stream.
• Interception - Particles that do not cross the fluid streamlines come in contact with fibers because of the fiber size.
• Submicrometre particles are diffused, increasing the probability of contact between the particles and collecting surfaces.
• Electrostatic forces - The presence of an electrostatic charge on the particles and the filter can increase dust capture.

A combination of these mechanisms results in formation of the dust cake on the filter, which eventually increases the resistance to gas flow. The filter must be cleaned periodically.

• PNEUMATIC CONVEYING SYSTEM
• SIZE REDUCTION EQUIPMENTS

*terms and conditions for the latest price and other points..



NOW ENQUIRY :mail